Affiliated Companies: Excel Industries, Inc. and H.K. Holdings, Inc.

48" x 0.250" American Steel Line Cut To Length Line

Ref # 7800-EX

Click on photo to enlarge

YEAR: 1977


Consisting of:

-Less Uncoiler (Can be provided at extra cost)

-Straightener: American Steel Line
Model 5-5
Maximum Capacity: 12" Wide .500" Thick
24" Wide .375" Thick
48" Wide .250" Thick
Attached Powered Holddown Roll
8.5" Dia. x 41" Face Steel Roll
Hyd. Motor Driven
Peeler Blade, 41.5" Wide
Hyd. Cylinders for in / out and up / down Movement
Passline Rolls
Tail End Breaker
Entry Edge Guides, Manual Adjustment
Entry and Exit Driven Pinch Rolls
8" Dia. x 51" Face Width
5 Work Rolls, 2 over 3
5" Dia. x 51" Face Width
Hydraulic Cylinder adjustment of top pinch and work rolls
Exit Edge Guides, Manual Adjustment
Main Drive Motor: 40 HP, 1780 RPM, 600 V, Louis Allis Pacemaker
thru Gear Reducer
Passline Height is approx.: 60"
Measuring Roll with Encoder
I-Beam Base: 160" L x 98" W
Overall Size: 241" L x 106" W x 105" High

-High Speed Shear: Stamco
Capacity: 0.055" - 0.250" x 72" (65,000 PSI)
SPM: 150 (was in CTL Line running 150 - 300 FPM)
Air Clutch and Brake
Note: Clutch and Brake were replaced in 2016.
Shear was removed from service in 2017.
Missing: 30 HP AC Motor, 1085 RPM
Frame 365T, Type P
Overall Dimensions: 9' L x 4' W x 11' High
31,900 Lbs.

-Hydraulic Power Unit with (2) - 7.5 HP AC Motors,
and 2 Vickers Pumps, 575/600 V

-(2) Late Model Operators Control Panels

-Line Direction: Left to Right

-Removed and in storage: Toledo, Ohio




Your machine has been added to the Cart.

Click the Checkout button below or continue adding machines to the Cart.

0

Main Office  |  723 Phillips Avenue, Bldg. D2 Toledo, Ohio 43612  |  Phone: (419) 841-3586  |  Fax: (419) 841-2986  |  Email: sales@dnhmachinery.com