Affiliated Companies: Excel Industries, Inc. and H.K. Holdings, Inc.

10,000# x 72" Braner/Ranger Banding Line Components

Ref # 5997-EX

Click on photo to enlarge

Consisting of the following:

-Downlayer: Braner
10,000 Lb. x 72" O.D. Capacity
Compound Tilt
3.5" Dia. x 76.25" Face Driven Rolls
1" Hex Shafts
Hyd. Motor Driven Rolls
82" x 75" Top
Hydraulic Actuated Horn, Approx. 20" Long
(2) - 5.75" Dia. Hyd. Tilt Cylinders
Approx. 61" Passline to top of Horn in raised position
Approx. 56" Passline to top of conveor in lowered position
(Passline can be lowered approx. approx. 23" by removing I-Beam Riser)
Right Angle Discharge

-Split Conveyor Section:
Slot down center for O.D. Grab
2.625" Dia. Rolls, Both sides driven
Chain driven by AC Motor thru reducer
80" between guards
57" Passline Height (can be lowered)
Overall Size: 102" L x 99" W

-No Banding Head / Table
(Manual Table available at extra cost)

-Skid Storage Conveyor:
S/N P73075
3.5" Dia. x 54" Face Rolls
1.25" Dia. Shafts
AC Motor Drive thru Reducer
30" Passline from floor to top of rolls
Overall Size: 75" L x 62" W

-Skid Banding Section: Ranger (Sold)
Model SB-10-72
S/N R73076
3.5" Dia. Conveyor Rolls
1.25" Dia. Shafts
Hyd. Drive for conveyor rolls
Hyd. Drive for horizontal rotation
Turnstile Type Bearing w/extranal gear
Overall Size: 69" L x 59" W
31" Passline from floor to top of rolls

-Scale Conveyor
Model SC-10-72
S/N R73077
3.5" Dia. x 54" Face Rolls
1.25" Dia. Shafts
Driven by 1 HP AC Motor thru reducer
1730 RPM, 230/460 V
Rice Lake Scale with Fairbanks Digital Readout
32" Passline from floor to top of conveyor
Overall Size: 74" x 75"

-In Storage: Rockford, IL

Your machine has been added to the Cart.

Click the Checkout button below or continue adding machines to the Cart.


Main Office  |  723 Phillips Avenue, Bldg. D2 Toledo, Ohio 43612  |  Phone: (419) 841-3586  |  Fax: (419) 841-2986  |  Email: