|
Used Pro Eco Slitting Line
Material: Cr-Hr-Hrpu-Hsla
Weight Capacity: 60,000 lbs.
Material Width: 72"
Material Thickness: 0.250" Mild Steel
Line Direction: Right to Left
Consisting of the following:
-4 Arm Entry Turnstile:
48" Arms
Power Rotation
6" C-Hook Slot
-Entry Coil Car:
48" Wide "V" Platform
Keeper Arms
Remote, 22" Long
Self-Contained Hydraulics
-Uncoiler:
Serial#: 6618-06-00
Model: SMU-DB-60-72-2024-72
Capacity: 60,000# x 72"
20" - 24" ID
72" O.D.
Hydraulic Expansion w/Pumpkin Tooth Mandrel
Overarm Holddown
Wichita Water Cooled Brake
Sliding Base
Outboard Bearing
*Missing Hydraulic Motor on Overarm*
-Entry Unit:
Peeler Table
Pinch Rolls, Bottom Roll driven by Hyd. Motor
Hyd. Crop Shear, Model HDCS-250-72
Serial#: 6618-08-00
Capacity: 72" x 0.250"
Exit Gauge Head
-Scrap Conveyor:
Rubber Belt
-Slitter Heads:
Injector Head Type
9" Dia. x 76" face Arbors
(2) Heads
Entry Side Guides
Passline Roll
Nuttall Pinion Stand w/7.19:1 ratio
150 HP DC Motor, 850/2200 RPM, 500 V
-Inspection Conveyor & Scrap Guides
Winder Oscillators mounted to table
-11' Long Pit Table:
-(2) Scrap Winders:
15" Dia. x 34" W Ball
20 HP AC Motor Drive
-Slitter Setup Table:
-Pad Tension Stand:
Entry Separator Tooling Bar
-Operators Station:
On Mezzanine
-Roll Type Tension Stand:
Quick Change - 2 Sets
78" Face x 16" Diameter Rolls
-Exit Crop Shear:
Deflector Roll
Threading Table
Driven Exit Pinch Rolls
-Dual Capacity Leveler:
12 Rolls, 6 over 6
1" Dia. Rolls
7 Rolls, 3 over 4
1.50" Dia. Rolls
-Recoiler:
Serial#: 6618-25-00
Model: HGR-60-72-20-72
20" Dia. Drum
(New Gripper never installed)
Hydraulic Clamp and Expansion
Hydraulic Pushoff
Overarm Separator
300 HP DC Motor, 650/1950 RPM, 500 V
Outboard Bearing Support
-Exit Coil Car:
78" Wide "V" Cradle
Self-Contained Hydraulics
-4 Arm Exit Turnstile:
Powered Rotation
C-Hook Arms
Hydraulic Pushoff
-Removed and in Storage
|
