|
60" x 7.00" x 40,000# Paxson Slitting Line
Driven Loop / Injector Head
Material Processed: CR, Galv. Aluminum & Painted
Maximum Entry Width: 60"
Maximum Entry Weight: 40,000 lbs.
Maximum Exit Weight: 45,000 lbs.
Coil ID Range Entry: 20" to 24"
Coil ID Range Exit: 20" to 24"
Line Speed: 80 - 700 FPM (Coil Build-Up Mode)
190 FPM (Bare Drum Speed)
Line Direction: Uncoiler: Left to Right
Recoiler: Right to Left
Consisting of the following:
-Entry L Type Coil Car: Paxson
51" Wide Bed
72" O.D. Capacity
4" Dia. Camrols
8" Bore Hyd. Lift Cylinder
Approx. 18" Lift
Self-Contained Hydraulics
Baldor 5 HP AC Motor, 208/220/440 V
Hand Pendant Control
Retractable Cable Reel
Approx. 12" from Floor to bottom of "V" Cradle
Overall Size: 86" L x 56" W x 60" High
-Mandrel Type Uncoiler: Warner Swasey
40,000# x 72" Capacity
78" Face Width Pumpkin Tooth Mandrel
20" - 24" Expansion Range
Hydraulic Expansion
Sliding Base
Attached Holddown Roll
Water Cooled Brake
Line Direction: Left to Right
-Peeler Table:
-(2) Slitter Heads: Paxson
Injection Head Design
7.00" Dia. x 62" Face Arbors
Entry Side Guides
100 HP DC Motor, 850/1750 RPM, 500 V
In-Line Reducer w/5.952:1 Ratio
-Tension Stand: Mico
60" Wide Combination Pad and Roll Type
Roll Stand is a Quick Change Style
Entry Separator Tooling Shaft
Cartridge Type
Drag Type Tension Unit w/Air Bladder
Alligator Type, Air Cylinder Open/Close
(2) - 16" Dia. x 66" Face Urethane Coated Rolls
Hydraulic Motor Threading Drive
(2) Eaton 214WCB Water Cooled Brakes
Exit Hydraulic Crop Shear
66" Face 4 Sided Blades
65" Pass Line
Overall Size: 150" L x 77" W x 128" High
23,000 lbs.
-(2) Scrap Winders:
Approx. 13" W x 32" Dia. Scrap Ball Capacity
Hydraulic Motor Driven
Powered Scrap Dump
Oscillate Wind
-Recoiler: Paxson
45,000# x 60" Capacity (with Outboard Support)
S/N: 11349-7-8
20" Dia. x 66" Face Drum w/24" pads
Powered Clamp and Expansion
Overarm Separator
Hydraulic Pushoff
150 HP Main Motor, 850/2000 RPM
Main Gear Box w/5:1 Ratio
Secondary Reducer w/10.8:1 Ratio
Passline: 48" from Floor to center of Drum
-Outboard Bearing Support:
-Exit L Type Coil Car: Braner
72.5" Wide Bed
72" O.D. Capacity
5" Dia. Camrols
8" Bore Hyd. Lift Cylinder
Approx. 20" Lift
Self-Contained Hydraulics
Pushbutton Controls
Gleason Retractable Cable Reel
Approx. 16" from Floor to bottom of "V" Cradle
Overall Size: 80" L x 78" W x 54" High
-Less Electrics:
-Removed and in storage: Toledo, OH.
|
