Affiliated Companies: Excel Industries, Inc. and H.K. Holdings, Inc.

36" x 5.00" x 24,000# Paxson Slitting Line

Ref # 11188-HK

Click on photo to enlarge

YEAR: 1970


Maximum Coil Weight: 24,000 lbs. (10,890 kg)
Coil Width: 36" (914.4mm)
Line Speed: 0 - 700 FPM (0 - 214 M/Min.)
Max. Coil O.D.: 72" (1828mm)
Direction of Travel: Left to Right
Pass Line Height: 44" (1117mm)

Previous Use Capacity: 1010 Tin
0.010" - 0.034" (0.25mm to 0.86mm)
12 Cuts at 0.034" (0.86mm)

Theoretical Cut Capacity: 21 Cuts at 0.0156" (0.40mm)
2 Cuts at 0.187" (4.7mm) @ 185 FPM

Consisting of the following:

-Pit Coil Car: Paxson
34" Wide "V" Cradle
Self-Contained Hydraulics
5 HP AC Motor, 3450 RPM, 230/460 V
Overall Size: 75" L x 35" Wide x 71" High

-Uncoiler: Paxson
S/N: 11234-3
Type: 4 Segment Expanding Mandrel
Type Expansion: Hydraulic Wedge
Mandrel Diameter: 16" - 20" (406mm - 508mm)
Mandrel Face Width: 36" (914mm)
AC Motor Threading Drive: 3 HP, 1170 RPM, 230/460 V
Self-Contained Hydraulics: 7.5 HP, 1760 RPM, 230/460 V
Water Cooled Brake: Eaton Airflex
Sliding Base:
Passline Height: 44.5" from Floor to center of Mandrel
Overall Size: 138" L x 67" W x 68" High

-Automatic Edge Guide:
Overall Size: 67" L x 27" W x 64" High

-Thickness Gauge: Vollmer
S/N: 7603/P76/837
Overall Size: 60" L x 14" W x 50" High

-Slitter Heads: Paxson
No. of Interchangeable Heads: 3
Entry Passline Roll: 6" Dia. x 38" Face Width
Entry Side Guides, Manual Adjustment
Parallel Arbor Adjustment
Arbor Size: 5" (127mm) Dia. x 37.5" (952.5mm) Wide
Knife Dia.: 10.5" O.D. Max.
Drive Motor: 15 HP DC, 2500 RPM, 240 V.,
55 Amps, Variable Speed
Foote Bros. Reducer: 7.6:1 ratio
Overall Size: 162" L x 72" W x 69" High

-Exit Passline Rolls:
Top Roll: 4.5" Dia. x 44" Face Width
Bottom Roll: 3" Dia. x 39" Face Width

-Scrap Winder: Paxson
Maximum Capacity: 1,500 lbs. (680 Kg)
Scrap Ball Size: 12" W x 36" O.D. (approx.)
Hydraulic Motor Driven
Oscillate Wind
Manual Scrap Ball Removal
Overall Size: 56" L x 37" W x 54" High

-Tension Stand:
Pad Type
(2) Air Cylinders for Pad Pressure
Entry Loop Arm
Entry Passline Rolls
Entry Separator Tooling Bar
Exit Passline Roll: 5" Dia. x 44" Face Width w/Tachomotor
Overall Size: 70" L x 60" W x 85" High

-Recoiler: Paxson
S/N: 11234-7
Drum Expansion: Hydraulic
Coil Pushoff: Hydraulic
Drum Size:
Diameter: 16" (406mm)
Width: 42" (1066.8mm)
Overarm Separator: Air Cylinder Operated
Passline: 44" from Floor to center of Drum
Drive Motor: 25 HP DC, 400/1600 RPM, 240 V, 8.8 Amps
into Falk Gearbox with 9.084:1 ratio
Holding Brake:
Overall Size: 183" L x 77" W x 75" High

-Electrics:
Mfg.: Excel Industrial Electronics
Date of Electronic Rebuild: 1999
PLC Controls: SSD 590 Digital Drives
Allen-Bradley SLC 150
DC Panel: 85" L x 21" W x 89" High
AC panel: 61" L x 16" W x 79" High

-Main Operators Control Panel: 57" L x 26" W x 50" High

-Pedestal for Entry Equipment: 24" L x 24" W x 47" High

-(2) Hydraulic Power Units:

-Slitter Tooling: Approx. Count
0.500" Wide Wapak Knives: 24 - 8.6875" O.D.
96 - 8.75" O.D.
23 - 9" O.D.
24 - 9.187" O.D.
16 - 9.5" O.D.
Keyway Size: 1" x 0.500"
Misc. Rubbers:

-Parts and Service Manual
-Original Bills of Material

-In Storage: Toledo, OH










Your machine has been added to the Cart.

Click the Checkout button below or continue adding machines to the Cart.

0

Main Office  |  723 Phillips Avenue, Bldg. D2 Toledo, Ohio 43612  |  Phone: (419) 841-3586  |  Fax: (419) 841-2986  |  Email: sales@dnhmachinery.com