48" x 0.190" x 25,000# Strilich Cut To Length Line
Ref # 11133-HK
Click on photo to enlarge
Strilich Cut-to-Length Line
Capacity: 48" x 0.040" - 0.190" Mild Steel Shear Strength: 50,000 PSI Yield Strength: 50,000 PSI Weight Capacity: 25,000 lbs. Sheet Length: 36" - 148" Sheet Stack Capacity: 6,000 lbs. Line Speed: 0 - 125 FPM Electrical Supply: 480 V/3 PH/60 Hz Line Direction: Right to Left
Consisting of the following:
-Single Mandrel Uncoiler: Maximum Coil Width Capacity: 48" Maximum Coil Weight Capacity: 25,000 lbs. 72" Maximum Coil O.D. 18.50" - 24.50" Hydraulic Three Arm Mandrel Expansion Range. Heavy Steel Cover leaves with tapered nose for easy coil loading. Wedge type expansion provides coil stability and constant hydraulic loading through the entire expansion range. Designed for accessibility and easy maintenance. Heavy Duty Construction. Hydraulic powered urethane covered overarm snubber roll with banding groove. Hydraulic feedup threading drive Hydraulic slide base +/- 6" horizontal travel with manual control for reel positioning. Air Drag Brake, water cooled.
-Hydraulic Z-Type Peeler Table: 8' Long Maximum Strip Width: 48" Heavy Duty fabricated structural steel construction. 1" thick beveled nose reinforced peeler plate. Heavy duty hydraulic table positioning cylinders. Cylinders piped to valve manifold. Free-standing operator control console.
-Adjustable Entry Guide: Maximum Material Width: 48" Heavy duty welded structural steel frame. Four sided hardened guide plates are mounted on heavy duty machined steel blocks with acme nuts. Guides are adjusted off center line through left and right hand acme screws via handwheel. Makes the initial centerline threading of the lead edge into the straightener pinch rolls easier.
-Combination Coil Breaker and Straightener on Common Base: Maximum Strip Width Capacity: 48" Material Thickness Capacity: 0.040" - 0.190" Entry 6" Dia. Powered Pinch Rolls, Air Cylinder Loaded 5 Roll Coil Breaker, 2 over 3, with 5.5" Dia. Rolls 7 Roll Straightener, 3 over 4, with 4" Dia. Rolls Exit 6" Dia. Powered Pinch Rolls, Manual Jackscrew Adjustment Common Variable Speed AC Vector Drive geared for 125 FPM Max. Roll Speed All Work Rolls and Pinch Rolls are chain driven.
-Flying Cutoff System: Hydraulic Cutoff Die complete with D2 HC-HC cutoff blades. Rack and Pinion Die Accelerator. Indramat Closed Loop DC Servo Drive and Control. Cutoff Die mounted on precision ball type slide ways. Roller Sheet Support Tables supplied.
-48" x 144" Belt Type Transfer and Inspection Conveyor: AC Variable Speed Drive Wheels and track to manually pushoff line to one side of the machine in order to provide access to permit changing the shear blades on the flying shear.
-Drop Type Sheet Stacker: Air operated drop arms and bell mouth side pans adjusted off center line. Air operated back tamper. 48" x 150" hydraulic lift table complete with powered roller top conveyor for end discharge.
-Main Operator's Control Station and Electrical Cabinets: Meter which indicates machine speed in ft/Min. Device which will permit operator to preset the number of parts to be cut and which will then stop the machine when preset number of parts has been obtained.
-Ancillary Items Electrical Drive Enclosures - (2) Electrical Transformer Main Operators Control Station with Remote Station Uncoiler Drag Brake Heat Exchanger Unit Entry/Exit Hydraulic Pumping Units Shear Head Hydraulic Pumping Unit
-Removed and in Storage: Toledo, OH.
Your machine has been added to the Cart.
Click the Checkout button below or continue adding machines to the Cart.
Shopping Cart Help
To Add A Machine: While viewing the specifications of a machine, click "Add Machine to Cart".
To Submit Your Request: Click on "Checkout", then fill out the form with your contact information, and click "Submit".
To Remove A Machine: Click on "Checkout", then click the "Remove" button next to the machine you wish to remove from your Shopping Cart.