|
Materials: CRS, HRPO, SS, Alum, Galvanized
Min./Max. Coil Width: 24" - 74"
Max. Coil Weight: 30,000# Approx.
Thickness Range: 0.024" - 0.111" CRS, HRPO, Galv. @ 40,000 PSI Yield
Thickness Range: 0.030" - 0.111" SS @ 40,000 PSI Yield
Thickness Range: 0.030" - 0.108" Alum @ 30,000 PSI Yield
Thickness Range: 0.020" - 0.135" High Speed Shear @ 45,000 PSI Shear
Max. Yield: 45,000 PSI (Approx.)
Coil I.D.: 20" - 24" (Nominal)
Max. Coil O.D.: 72" Approx.
Min./Max. Sheet Length: 24" - 12'
Max. Bundle Weight: 10,000# @ 12'
Line Direction: Right to Left
Line Speed: 20 - 200 FPM
Required Area: 25' x 75' (Approx.)
Required Power: 460 V with Transformers
Consisting of the following:
-Entry Coil Feed Conveyor:
Powered Roller Conveyor Top
-Entry Coil Car - Alcos:
Floor Mounted
Mast Type
Self Contained Hydraulics
Powered Lift and Traverse
-Uncoiler - Wean:
Single Mandrel Type
Floor Mounted
Powered Expansion
Feedup Drive
Holddown with Powered Snubber
Self Contained Hydraulic Unit
Slide Base
-Entry Unit - Alcos:
Extending Blade Type Peeler
Powered Entry Pinch Rolls
-Corrective Leveler - Herr Voss:
Model #VKL RH 84/1.687-19/9 4HI
Nineteen (19) Work Rolls x 1.625" Diameter
4 HI Configuration
Nine (9) Flights of Backup Rolls (Seven Powered)
125 HP DC Reliance Motor (1750 / 2100 RPM, 500V)
-Hump Table - Alcos:
Manual Actuation
Rubber Coated Idler Roll Top
-Shear Prep Unit:
Power Entry Pinch Rolls
Manual Adjustable Side Guides
-High Speed Shear - Redbud (2010)
Down-cut Type
Single Rake Blade
Manual Gap Adjust
Hydraulic Unit
-Stacker - Alcos:
Powered Side Tamper
Manual End Stop
Lift Table with Powered Roller Conveyor Top
-Electronics:
Main Operators Console with Siemens Touch Screen (New in 2012 Approx.)
Misc. Control Consoles
AC/DC Cabinet with Siemens DC Drives with PLC (New in 2012 Approx.)
Misc. Transformers
-Spare Parts:
One (1) Set Leveler Work Rolls (used)
One (1) Set Leveler Work Rolls (serviced @ 1.640")
Shear Blades
-In Storage
|
