Affiliated Companies: Excel Industries, Inc. and H.K. Holdings, Inc.

72" x 8.00" x 60,000# Cincinnati Slitting Line

Ref # 10967-HK

Click on photo to enlarge


Material Width: 12" - 72"
Coil Weight: 60,000 lbs.
Coil I.D.: 20" - 24"
Coil O.D.: 72"
Line Direction: Left to Right

-Entry Coil Car:
"L" Type Above Floor Standing Design
Hydraulic Cylinder Lift
Powered Traverse
Self-Contained Hydraulics
Control Panel

-Mandrel Uncoiler:
Model: HDR 72-250
S/N: HDR-1030
Hydraulic Expansion
Powered Holddown Roll
Wichita Water Cooled Brake
Sliding Base
Feedup Motor
Outboard Support

-Entry Peeler Table:
Adjustable Edge Guides
Powered Entry Pinch Rolls
Entry Hydraulic Crop Shear

-(2) Cincinnati Removable Slitter Heads:
72" x 8" Dia. Arbors
76" Face Arbors
Outboard Housing slides in to 48" for slitting heavier gauges.
Parallel Arbor Adjustment
Knife O.D. Range: Approx. 12" - 14"
Key Size: 1.125" x 0.375"
Jet Nuts
Drive: 20 HP AC Motor, 1570 RPM, 240/480V
Falk Reducer w/104.98:1 Ratio
Formsprag Overrunning Clutch, FSO 900
Note: Drive Base set up for adding DC Motor
for Drive Slitting.
Passline: Approx. 50"
Tooling: Spacers and Rubbers on Heads (No Knives)
Overall Size: Heads: 138" L x 45" W x 76" High (Each Head)
Base: 160" L x 57" W x 13" High
Drive: 124" L x 95" W x 56" High

-Two (2) Scrap Winders:
Hydraulic Motor Driven
Powered Open / Close
Sliding Dump Table

-Tension Stand: Strilich
Drag Board Type
72" Wide x 0.135" Max.
Dual Cylinders for Pressure
Clam Shell Type Open/Close
Entry Pinch Rolls
6" Dia. x 76.5" Face Rolls
Bottom Roll Driven via Hydraulic Motor (Less Motor)
Top Roll Idler
Exit Threading Table
Passline: 42"
Overall Size: 106" L x 70" W x 57" High

-Recoiler:
Model: 72-40-50K
S/N: RR-1161
20" Dia. Drum
Powered Expansion and Gripper
Overarm Separator
Hydraulic Pushoff
100 HP DC Motor with Cleveland R.A. Gearbox
4 Speed Drive-All Transmission w/1:1, 2:1, 3.053:1 and 4.077:1 ratios
Outboard Support

-Exit Coil Car:
"L" Type Above Floor Standing Design
Hydraulic Cylinder Lift
Powered Traverse
Self-Contained Hydraulics

-Electrics, Hydraulics, Controls:

-Removed and in storage: Toledo, OH.


Your machine has been added to the Cart.

Click the Checkout button below or continue adding machines to the Cart.

0

Main Office  |  723 Phillips Avenue, Bldg. D2 Toledo, Ohio 43612  |  Phone: (419) 841-3586  |  Fax: (419) 841-2986  |  Email: sales@dnhmachinery.com