YEAR: 1981
Materials: HRS, P/O, Tread Plate Max. Coil Width Range: 36" - 96" (Leveler #1) 36" - 73" (Leveler #2) Thickness Range: 0.180" - 0.500" (Leveler #1) 0.075" - 0.180" (Leveler #2) Max. Shear: 50,000 PSI (approx.) Max. Yield: 40,000 PSI (approx.) Max. Coil Weight: 80,000# (Original Spec) Max. Coil Weight: 65,000# (current use) Coil I.D.: 20" - 30" (Cones) Max. Coil O.D.: 80" Line Direction: Right to Left Sheet Length: 48" - 660" (55') Mode of Operation: Start / Stop Line Speed: 0 - 75 FPM (Leveler #1) 0 - 150 FPM (Leveler #2) Max. Finished Bundle: 30,000# at 55'
Consisting of the following:
-Entry Coil Storage Saddles: Three (3) Coils x 65,000 each Floor Mounted
-Entry Coil Car: Pit Type Self Contained Hydraulics Powered Lift and Traverse Cable Reel
-Feedup Assist Assembly: Floor Mounted Holddown with Powered Snubber Roll Tail Guard
-Uncoiler: Floor Mounted Double Cone Type Hydraulic Feedup Motor - each head Slide Base - each head -Entry Unit: Extending Blade Peeler Powered Side Guides Powered Entry Pinch Rolls Automatic Edge Control
-Inspection Table:
-Leveler #1: 96" Wide Capacity Powered Entry Side Guides Powered Entry Pinch Rolls Eleven (11) Work Rolls in an 5/6 Configuration 6.75" Diameter Work Rolls 4 HI Configuration Three (3) Flights of Motorized Backup Rolls 200 HP DC Motor
-Carry-over Tables for 96" Wide Operation: Powered Entry Table Powered Exit Table
-Leveler #2: 72" Wide Capacity Powered Entry Pinch Rolls Eleven (11) Work Rolls in an 5/6 Configuration 3.50" Diameter Work Rolls 4 HI Configuration Three (3) Flights of Motorized Backup Rolls 200 HP DC Motor Slide Base to Traverse in/out of Line
-Inspection Table: Measuring Wheel
-High Speed Shear: Deflector Roll Mechanical Actuation Single Rake Blade Powered Gap Adjust Powered "Kick-Out" Rolls into Stacker Scrap Bucket
-Stacker: "Slide-out" Drop Type Powered Side Tampers Powered End Stop
-End Discharge Conveyor:
-Hydraulic System: Central Hydraulic System
-Electronics: AC/DC Cabinets SAF Drives PLC
-Hydraulic System:
-Misc. Operators Control Consoles: -Minimal Drawings/some manuals:
-Spare Parts: Work Rolls / Large Leveler Bearings / Large Leveler Work Rolls / Small Leveler
-Installed and Under Power
|