Affiliated Companies: Excel Industries, Inc. and H.K. Holdings, Inc.

48" x 7.00" x 40,000# Stamco / Seco Slitting Line

Ref # 10741

Click on photo to enlarge


Materials: CR, Galv., Alum.
Max. Coil Width: 48"
Thickness Range: 0.010" - 0.125"
Max. Coil Weight (Entry): 40,000#
Max. Coil Weight (Entry): 30,000#
Max. Shear: 45,000 PSI
Max. Yield: 45,000 PSI
Coil I.D.: Entry: 20" - 24"
Exit: 20"
Max. Coil O.D.: 60"
Line Direction: Left to Right
Mode of Operation: Driven / Loop

Consisting of the following:

-Entry Coil Car- Rex
Mast Type
Floor Mounted
Self-Contained Hydraulics
Powered Lift and Traverse
Powered Indexing Rolls
Machine Mounted Controls
Cable Reel

-Uncoiler: Stamco
Single Mandrel Type
Hydraulic Expansion
Hold-down with Powered Snubber Roll
Slide Base
AC Feed-up Drive
Water Cooled Brake
Water Chiller for Brake

-Slitter Assembly: Herr
Manual Side Guides
Idler Pinch Rolls
7" Diameter Arbors
Manual Outboard Retraction
Manual Top Arbor Adjust
DC Motor

-Pit Section:
Powered "Bomb Bay" style Cross-Over Table

-Tension Stand
Drag Type
Entry Separator Shaft

-Recoiler: Seco
Hydraulic Push-off
Hydraulic Expansion and Gripper
Overarm Separator
100 HP DC Motor

Exit Turnstile:
Two (2) Arms x 30,000# per arm
Manual Rotation
Powered Push-off
Slotted for C-Hook

-One (1) Scrap Winder:
Hydraulically Powered
Level Wind

-Electrical Controls:
Main Operators Control Console
Auxiliary Operators Stations
AC & DC Control Cabinets

-Slitter Tooling
Knives- 0.500" - (27); 0.250" - (63)
Steel Spacers- 170"
Rubbers- 400"
Thread Guards
Misc. Separator Tooling

-Hydraulic System

Banding Line consisting of:

-Downender
6,000# x 65" O.D. Capacity
90 Degree Discharge
Powered Conveyor Top
Powered Horn in/out

-Powered Conveyor
62" Wide x 16' Long

-Banding Table
60" Wide x 96" Long
Powered Table Top with Two (2) Conical Indexing Rolls
Signode M20 Strapping Head with 3/4" Banding

-90 Degree Conveyor
Idler Conveyor Top

-Powered Conveyor
75" Wide x 19' Long

-Removed and in Storage

Your machine has been added to the Cart.

Click the Checkout button below or continue adding machines to the Cart.

0

Main Office  |  723 Phillips Avenue, Bldg. D2 Toledo, Ohio 43612  |  Phone: (419) 841-3586  |  Fax: (419) 841-2986  |  Email: sales@dnhmachinery.com