Materials: HRS, CRS, P & O Max. Coil Width: Entry: 72" Min. Coil Width: Entry: 12" Thickness Range: 0.020" - 0.187" (Head #1) 0.075" - 0.375" (Head #2) Max. Coil Weight: 50,000# Max. Shear: 45,000 PSI Max. Yield: 45,000 PSI Coil I.D.: Entry: 20" - 24" Exit: 20" & 24" Max. Coil O.D.: 72" Line Direction: Right to Left Mode of Operation: Driven
Consisting of the following:
-Entry Coil Car: L & M Year: 1999 Mast Type Floor Mounted Self Contained Hydraulics Powered Lift and Traverse Narrow Coil Retaining Slots Pendant Control Cable Reel
-Uncoiler: Single Mandrel Type Hydraulic Expansion "Pumpkin Tooth" Segments Water Cooled Brake Slide Base Feedup Drive Holddown with Powered Snubber Roll Cooling System for Brake
-Entry Unit: Extending Blade Type Peeler Four (4) Roll Coil Breaker (8" Dia.) Powered Entry Side Guides Inspection Table Powered Exit Side Guides
-Crop Shear: Down-cut Type Powered Tamper Roll Scrap Ramp Scrap Cart
-Slitter Base: Powered Entry Pinch Rolls, 10" Dia. Powered Entry Side Guides Manually Adjustable Scrap Guides H & S Gearbox w/62.31:1 ratio, .927 SF 150 HP DC Motor, 1750/2000 RPM, 500V
-Two (2) Slitter Heads: Crane Removable Type Powered Outboard Retraction Powered Top Arbor Adjust Slitter Head #1: 9" Dia. Arbors Slitter Head #2: 12" Dia. Arbors
-Pit Section: Cross Over Table
-Two (2) Scrap Winders: Pro Eco Level Wind Automatic Scrap Dump 0.500" x 1" Capacity per Winder
-Tension Stand: Drag Type Recoiler Feed Table
-Recoiler: 20" Dia. Drum w/Risers for 24" Hydraulic Expansion and Gripper Hydraulic Pushoff Overarm Separator Lufkin Main Gearbox w/7.7:1 ratio Rated at 649 HP, 5.2 SF Two (2) Speed H & S Gearbox w/3:1 and 1:1 Ratios, 1.13 SF 150 HP DC Motor, 650/1900 RPM -Exit Coil Car: Mast Type Floor Mounted Self Contained Hydraulics Powered Lift and Traverse Coil Stabilizing Arm Pendant Control Cable Reel
-Exit Turnstile: Two (2) Arms x 50,000# Each Arm Powered Rotation Slotted for C-Hook Provision for a Pulloff Assembly
-Electrical Controls: AC & DC Control Cabinets Drives new in 2016
-Control Consoles: Main Operators Console Machine Mounted Auxiliary Operators Stations
-Slitter Tooling: Knives Rubbers Spacers Separator Tooling
-Two (2) Hydraulic Power Units
-Spare Parts for Recoiler Gripper
-Line is Removed and in Storage
|