Affiliated Companies: Excel Industries, Inc. and H.K. Holdings, Inc.

48" x 7.50" x 30,000# Braner/Loopco Slitting Line

Ref # 9707-C

Click on photo to enlarge


CAPACITY: 30,000 LBS.
LINE DIRECTION: LEFT TO RIGHT

CONSISTING OF THE FOLLOWING:

-ENTRY COIL CAR: LOOPCO
30,000# CAPACITY
48" WIDE "V" CRADLE
REMOVABLE RISER - 9" HIGH
ABOVE FLOOR TYPE
SELF CONTAINED HYDRAULICS
PENDANT CONTROL

-UNCOILER: LOOPCO
30,000# x 53" CAPACITY
16" - 20" I.D. W/ PADS TO 24"
HYDRAULIC EXPANSION
FOUR SEGMENT MANDREL
POWERED HOLDDOWN ARM
SLIDING BASE
WICHITA WATER COOLED BRAKE
2 HP AC MOTOR THREADING DRIVE W/AIR CLUTCH
PASSLINE: APPROX. 39.5" FROM FLOOR TO CENTER OF MANDREL

-COMBINATION PEELER/HOLDDOWN: LOOPCO
HYD. UP / DOWN, IN / OUT PEELER
POWERED HOLDDOWN ROLL

-TURRET SLITTER HEAD: BRANER
7.5" DIA. x 50" ARBORS
TURRET HEAD TYPE - (2) HEADS
ENTRY PINCH ROLLS
ENTRY SIDE GUIDES, MANUAL ADJUSTMENT
15 HP AC MOTOR, 1750 RPM, 230/460 V

-(2) SCRAP WINDERS: PAXSON
OSCILLATE WIND
POWERED SCRAP DUMP

-COIL TECH PAD TYPE TENSION STAND

-RECOILER: LOOPCO
20" DIA. x 58" FACE DRUM
MANUAL CLAMP AND EXPANSION
HYD. PUSHOFF
OVERARM SEPARATOR
75 HP RELIANCE DC DRIVE MOTOR
650/1950 RPM, 500 V, W/BLOWER
RELIANCE DC DRIVE
H&S 2 SPEED GEARBOX, 13.75:1 AND 41.0:1 RATIOS
HYDRAULIC POWER UNIT

-2 ARM TURNSTILE: RANGER
30,000# CAPACITY PER ARM
61" LONG ARMS
WITH PUSHOFF
POWERED ROTATION
C-HOOK SLOT IN ARM WITH C-HOOK
(NOTE: TURNSTILE MAIN SHAFT IS MISSING)

-DOWNLAYER
IN-LINE DISCHARGE
60" O.D. CAPACITY
NON-POWERED CONVEYOR ROLLS

-LARGE QUANTITY OF TOOLING
APPROX. KNIFE COUNT: 1/2" = 50 @ 12.250" O.D.
3/8" = 40 @ 12.700" O.D.
1/4" = 26 @ 12.900" O.D.

-HYDRAULIC POWER UNITS

-MAIN OPERATORS CONTROL PANEL

-MAIN ELECTRICAL CABINET

-REMOVED AND IN STORAGE



Your machine has been added to the Cart.

Click the Checkout button below or continue adding machines to the Cart.

0

Main Office  |  723 Phillips Avenue, Bldg. D2 Toledo, Ohio 43612  |  Phone: (419) 841-3586  |  Fax: (419) 841-2986  |  Email: sales@dnhmachinery.com