Affiliated Companies: Excel Industries, Inc. and H.K. Holdings, Inc.

2 Hi 1 Stand Lewis Rolling Mill

Ref # 9561-HK

Click on photo to enlarge

YEAR: 1950


22" x 40" Non-Reversing Cold Mill

Coil Weight: 30,000 lbs. (13,500kgs)
Mill Speed: 309 to 618 FPM (90 to 190 MPM)
Post Size: 13" x 15.50" (330mm x 340mm)
Window Dimension: 2' Wide x 6'-1.25" High (610mm W x 1855mm H)
Mill Bearings: Timken Roller
Main Mill Drive Motor: 200 HP, 575/1150 RPM, 230 V DC

Coil Information:
Width: 36" (915mm)
I.D.: 20" (508mm)
O.D.: 60" (152 mm)

Consisting of the following:

-Payoff Reel:
Mfg: Loopco
Year: 1973
Model: 1600
Mandrel: 15.50" - 20" Dia. x 44" Face (508mm)
Tension: Wichita Water Cooled Brake
Features: Holddown Roll, AC Thread Up Motor, Hydraulic Expansion,
Sliding Base.

-Tension Reel:
Mfg: Matteson
Year: 1976
Drum: 20" Dia. x 44" Face (508mm Dia. x 1117mm Face)
Hydraulic Expansion and Gripping
Motor: 100 HP DC, 400/1200 RPM
Gear Ratio: 9.69:1
Features: Coil Stripping with (2) - 4" Dia. x 45.50" Stroke Cylinders
Overhead Holddown
Motorized Lube Pump
Sliding Base

-(1) Coil Car: (Sold)
Mfg: Loopco
Year: 1973
With 40" Platform
Hydraulic Coil Lift: 6" Dia. x 20" Stroke Cylinder
Motorized Car Travel through Chain Drive

-Combination Gear and Pinion Drive:
Mfg: D.O. JAMES, 1976
Serial: #255454
Input Speed: 575/1190 RPM
Rating: 288 HP at 575 RPM
Pinion Centers: 22" (560mm)
Motorized Lube Pump

-(2) Spindles with Universal Couplings and Carrier

-Mill Stand:
Mfg: Lewis
Year: 1950, Modified - 1976
2 Housings jointed by 39.50" Separator (1000mm)
Electro-Mechanical Screwdowns
Motors: 2 - 5 HP, 900 RPM, 220/440 V, 3/60 AC
Screw Speed: 0.083" to 0.208" Per Minute
Screw Dia.: 7" (177mm)
Main Drive: 200 HP DC

-Mill Base:
Mfg.: Waterbury Farrel, 1976
Welded Steel Construction

-Entry Deflector Roll with Peeler Table

-Exit Deflector Roll, Wiper and Carry Over to Tension Reel.

Available with Two Sets of Roll, Chocks and Roller Bearings.

Note: SCR's and Control not available.

Removed and in Storage: Rockford, IL


Your machine has been added to the Cart.

Click the Checkout button below or continue adding machines to the Cart.

0

Main Office  |  723 Phillips Avenue, Bldg. D2 Toledo, Ohio 43612  |  Phone: (419) 841-3586  |  Fax: (419) 841-2986  |  Email: sales@dnhmachinery.com