Material Processed: Silicone Steel, Grain and Non-Grain Oriented, Stainless Steel, Aluminum Shear Strength: 50,000 to 90,000 PSI (350 - 610 N/mm2) Entry Width: 62" Untrimmed (1575mm) Thickness Range: 0.008" - 0.125" (0.2 to 3.2mm) Coil Weight: 40,000 lbs. Coil ID Entry: 18" to 24" (475 to 610mm) Coil ID Exit: 18" - 20" - 24" (457 - 508 - 610mm) Coil OD Exit: 26" to 72" (660 to 1830mm) Slitting Capacity: 25 Cuts at 0.008" (0.2mm) 20 Cuts at 0.025" (0.635mm) 7 Cuts at 0.125" (3.175mm) Line Speed: 200 and 600 FPM (60 and 182 M/Min) Line Direction: Left to Right
Consisting of the following:
-Entry L Type Coil Car: Self Contained Hydraulic Power Unit Hydraulic Lift and Traverse
-Mandrel Type Uncoiler: Overarm Holddown Hydraulic Expansion Slide Base DC Motor Regen Brake and Feedup
-Entry Cascade Unit for Entry Side Driven Loop:
-Slitter Entry Unit: Side Guides 3 Roll Coil Breaker Gamma Thickness Gauge Crop Shear Slitter Entry Pinch Roll Unit, Driven
-Injector Slitter Heads: (2) Heads with bottom Arbor Adjustment 8.30" Dia. x 63" Face Arbors (210.8mm) Each Head has its own Pinion Stand and Drive Shafts Powered Knife Gap Adjustment
-Scrap Winder Baller: 24" x 24" Scrap Ball Capacity
-Driven Feed Rolls to Drive Metal into the Loop: Urethane Covered
-Pit Entry Cascade Unit:
-Pit Cross Over Table:
-Pit Exit Cascade Roll:
-Tension Stand: Separator Tooling Bar Pad Type Tension Stand Roll Type Tension Unit Hydraulic Motor Braking on bottom Tension Stand Roll Urethane Covered Tension Stand Rolls Tension Stand tilts to the Recoiler with an ironing roll.
-Recoiler: Outboard Bearing Support DC Motor Drive Hydraulic Pushoff
-Exit Coil Car: Hydraulic Lift and Traverse Self Contained Hydraulic Power Unit Base in the floor rotates 90 Degrees
-Hydraulic Units Entry and Exit to operate the line:
-Line is Installed and Under Power: IL.
Your machine has been added to the Cart.
Click the Checkout button below or continue adding machines to the Cart.
Shopping Cart Help
To Add A Machine: While viewing the specifications of a machine, click "Add Machine to Cart".
To Submit Your Request: Click on "Checkout", then fill out the form with your contact information, and click "Submit".
To Remove A Machine: Click on "Checkout", then click the "Remove" button next to the machine you wish to remove from your Shopping Cart.