|
YEAR: 2010
-Hot Strip Width: 305 mm Min. - 1880 mm Max.
-Hot Strip Thickness: 0.8 - 6.0 mm (Max. Operation Speed: 91.4 m/min.
(300 ft/Min.)
-Threading Speed: 6.7 - 7.6 m/Min. (Max. 9.1 mpm - 30 fpm)
-Coil Diameter: Coil I.D.: 508 / 610 mm
Coil O.D.: 2,134 mm
-Coil Weight: 30 T Max.
-SCS Brush Max. Speed: 45.7 m/Min. (150 ft/Min.)
Consisting of the following:
-Coil Storage and Loader:
Maximum Coil Weight: 30 Ton
Number of Storage Coil: 4 Coils
-Uncoiler:
Max. Coil Weight: 30 Ton
Coil I.D.: 20" (510 mm), 24" (610 mm)
Coil O.D.: 84" Max. (2,134 mm)
Type: Reel Moving & Braking Type
-Crop Shear:
Max. Thickness: 6 mm
-Hydraulic Roller Leveler:
Material: Carbon Steel
Yield Strength: 80,000 psi (552 Mpa)
Line Speed: Max. 150 FPM (45.7 MPM)
Roll: 7 Top & Bottom 4 High (Roll 1.8" Dia.)
Hydraulic Motor: 125 HP
-2 Alpha Blast Cells:
Type: Slurry Shot Blast
Impeller: 125 HP, 4 Set/Cell
Slurry Pump: 200 HP, 2 Set
Cell Chamber 2 Set
Impeller and Motor 8 Set
Chamber Sump
Common Collection Tank
-SCS Brush:
Type: Wet Scatch Brush, 3 Brush Roll/Bur
Motor: 60 HP, 6 Set
Brush Roll & Bur, 6 Set (356 Dia.)
Filtration System
-Dryer & Pad:
Air Wipping Dryer, Pressing Pad
Blower: 50 HP
-Electrostatic Oiler:
Power: 3 PH, 60 HZ/460VAC
Oil Weight: 50 ~ 400mg/ft2 (500~4300mg/m3)
-Recoiler:
Max. Coil Weight: 30 Ton
Coil I.D.: 20" (510 mm) / 24" (610 mm)
Coil O.D.: Max. 84" (2,134mm)
Drive: DC 250 HP/A.B PLC
-Coil Car:
30 Ton
-Magnetic Separator: 2 Set
-Filtration System: 2 Set
-Bag Filter
-Gravity Filter
-Heat Exchanger: 30 KW, 2 Each) 1 Set
-Product Features:
Paint Adhesion and Corrosion Results
Dry Advantages
Mill Surface Defect Mitigation
Improved Shape
-Auxiliary Equipment:
Magnetic Separator (2 Sets), Filtration System, Heat Exchanger
|
