-Maximum Coil Weight: 1,500 lbs. -Core Size: 2" and 5" -Maximum Line Speed: 750 FPM -Strip Tension Range: with Tension Stand: 5 - 60 lbs. Bypassing Stand: 60 - 175 lbs.
-5 HP Rotational Motor -Parker SSD Drive -Hydraulic Traverse -Belt Driven -Giddings and Lewis Controls -The Guide Arm apparatus included with this machine. -Pneumatic Tension Dancer: The dancer raises the pass line for optimum entry to the guide system. The strip passes over the two top stationary rotating cylinders and then wraps around the movable bottom cylinder. The pneumatic cylinder supplies the tension to the strip as the winder adjusts speed to maintain the dancer's position. This arrangement is ideal for the low strip tensions (4 - 60 pounds) necessary to accurately wind light gauge material. Heavier gauge material is wound bypassing the dancer; as the winder's motor supplies direct torque strip tension to 150 pounds.
Simplicity of operation is coupled with sophisticated winding patterns to consistently produce beautiful coils. Coil data, including material size, tension and wind speed are entered through the HMI data screen. Setup screens allow the coil positioning and edge control prior to winding. Pressing start loads the parameters and calculates the coil's winding profile. As the coil winds, pattern changes and on-the fly edge changes assure a good coil is always wound.
|