Affiliated Companies: Excel Industries, Inc. and H.K. Holdings, Inc.

72" x 7.00" x 55,000# Delta / Cincinnati Slitting Line

Ref # 10637-C

Click on photo to enlarge

Weight Capacity: 55,000 lbs
Thickness Capacity: 0.135" Mild Steel

Consisting of the following:

-Entry Coil Car: Delta
"L" Type
72" O.D. Capacity
5" Dia. Camrolls
Self-Contained Hydraulics

-Uncoiler: Delta
Model UN 346
78" Face Mandrel
Hydraulic Expansion, 18" - 24"
Pumpkin Tooth Mandrel
Snubber Roll with Hydraulic Drive Motor
Wichita Water Cooled Brake
5 HP AC Motor Threading Drive
Sliding Base with 8" Travel
Max. Speed 500 FPM Constant

-Peeler Table:
Hydraulic Cylinder Operated
Powered Up/Down and In/Out Movement

-Driven Pinch Rolls:
84" Face Rolls
Hydraulic Cylinder Loaded

-Entry Side Guides:
Powered Adjustment by Hydraulic Motor

-Entry Crop Shear:
0.187" Capacity Zip Shear
Hydraulic Cylinder Actuated

-Slitter Heads: Cincinnati
Two Drop in Heads
7" Dia. Arbors w/Jet Nuts
Outboard Bearing travels in over the arbors to 36" Wide
100 HP GE DC Motor, 500/2000 RPM, 500 V
Note: Second Head has had arbor shafts reworked and
waiting for reassembly.

-(2) Scrap Winders:
Hydraulic Motor Driven
Hyd. Open/Close
Oscillate Wind

-Threading Table:
Hydraulic Cylinder Operated

-Pit Table:
10' Long Table
Hydraulic Cylinder Operated

-Drag Tension Stand:
Entry Separator Tooling Bar
10" Wide Boards with Felt Pads
(3) - 5" Bore Air Cylinders for Clamping Pressure

-Driven Pinch Rolls:
Hydraulic Motor Powered
Rubber Covered Rolls

-Precision Leveler: Delta
19 Rolls, 9 over 10 Configuration
2.18" Dia. Work Rolls
7 Flights of Wedge operated Backups
5 Flights Adjustable with Digital Readout Screen and Joy Stick Controls
Spare set of rolls ground and in crate (2.16" Dia.)

-Exit Tach Rolls:
5" Dia. x 84" Face Rolls, Rubber Covered
(Spare Rolls still paper wrapped)

-Exit Crop Shear:
0.187" Capacity Zip Shear
Hydraulic Cylinder Actuated

-Threading Table:
Lift and Extend Style
Hydraulic Cylinder Operated

-Recoiler: Delta
Model RC 3322
20" Dia. x 85" Face Drum
Bolt on Pads for 24" I.D.
Manual Grip and Expansion
Hydraulic Pushoff
Overarm Separator w/4.5" Dia. x 84" Tooling Bar
10" Bore Air Cylinder Lift
300 HP Reliance DC Motor, 300/1500 RPM, 500 V
Alton Gear Reducer, Rated at 500 HP w/2.21 Serv. Factor,
Reduction Ratio 11.33:1
Digital Controls

-Exit Coil Car:
"L" Style
79" Wide Platform
Coil Stabilizer Arms
Self-Contained Hydraulics

-Exit Turnstile:
3 C-Hook Type Arms
Powered Rotation
Hydraulic Pushoff

2 Full Sets of Tooling

-Line Direction: Left to Right

-Installed and Under Power

Your machine has been added to the Cart.

Click the Checkout button below or continue adding machines to the Cart.


Main Office  |  723 Phillips Avenue, Bldg. D2 Toledo, Ohio 43612  |  Phone: (419) 841-3586  |  Fax: (419) 841-2986  |  Email: