Affiliated Companies: Excel Industries, Inc. and H.K. Holdings, Inc.

48" x 0.375" x 40,000# Braner / Delta Cut To Length Line

Ref # 10506-HK

Click on photo to enlarge


Materials: 48"
Thickness Range: 0.090" - 0.375" (light gauge is approx.)
Max. Shear: 50,000 PSI
Max. Yield: 50,000 PSI
Max. Coil Weight: 40,000#
Coil I.D.: 20" - 24"
Max. Coil O.D.: 72"
Line Direction: Left to Right
Stacker Length: 2 - 10'
Mode of Operation: Start / Stop
Line Speed: 0 - 160 FPM
Passline (Approx.): 46"
Dimensions (Approx.): 45' x 60'

Consisting of the following:

-Entry Turnstile: Pro Eco
Four (4) Arms
30,000# Capacity each Arm
Powered Rotation
Arms Slotted for C-Hook, (6" W x 13" High Slot)
48" Usable Arm Length
Passline: 45" from Floor to top of Arms
Overall Size: 176" L x 72" W x 45" High

-Entry Coil Car: Rowe
30,000# Capacity
Model BGY-30
S/N: 23.735
44" Bed Width
60" O.D. Capacity
Floor Mounted
Power Lift and Traverse
Cable Reel
Approx. 24" from Floor to bottom of "V" Cradle
Overall Size: 76" L x 60" W x 38" High
3,600 Lbs.

-Uncoiler: Braner
New in the 2000's
40,000# Capacity
S/N: EH-9962-A1
Mandrel Type
49" Face Mandrel
Hydraulic Expansion, 20" - 24" I.D.
Pumpkin Tooth Mandrel
Holddown with Powered Snubber, 24" W x 9" Dia. Steel Roll
Water Cooled Brake
Hyd. Motor Feedup Drive
Traversing Base
Passline: 50" from Floor to center of Mandrel
Overall Size: 150" L x 78" W x 89" High
20,000 Lbs

-Water Cooler for Water Cooled Brake:
Overall Size: 43" L x 40" Wide x 51" High

-Flattener: Delta
48" x 0.375" Capacity (Mild Steel)
Extending Blade Peeler
Powered Side Guides
Powered Entry Pinch Rolls (9" Diameter)
Thirteen (13) Work Rolls in a 6 over 7 Configuration
6" Dia. x 54" Face Rolls
One (1) Flight of Fixed Backup Rolls
100 HP DC Motor (1750 RPM)
Measuring Wheel
Spare Rolls (need to be reground)
Spare Bearings

-Shear: Wysong
Model #638
Capacity: 72" x 0.375" Mild Steel
S/N: P33-110
Entry Side Guides, Hydraulic Motor Adjusted
Guides open to 52.5" Max. Width
Downcut Type
73" Long Single Rake Blade
50 SPM
Wichita Clutch and Brake
20/15 HP AC Motor, 1760 RPM, 230/460 V
Passline: 45.5"
Overall Size: 192" L x 88" W x 76" High
31,000#

-Runout Table:
11'8" Powered Belt

-Operators Controls:
Main Control Console
Aux. Control Consoles

-AC/DC Control Cabinet:
Magnetek DSD412 DC Drive (New in the 2000's)
Digital Measuring System

-Hydraulic Power Unit:
15 HP AC Motor, 1760 RPM, 230/460 V
Overall Size: 39" L x 32" W x 52" High

-Removed and in Storage: Toledo, OH.

Your machine has been added to the Cart.

Click the Checkout button below or continue adding machines to the Cart.

0

Main Office  |  723 Phillips Avenue, Bldg. D2 Toledo, Ohio 43612  |  Phone: (419) 841-3586  |  Fax: (419) 841-2986  |  Email: sales@dnhmachinery.com