Affiliated Companies: Excel Industries, Inc. and H.K. Holdings, Inc.

12" x 3.50" x 5,000# Torrington Slitting Line

Ref # 10480-HK

Click on photo to enlarge


Materials: HRS, CRS
Max. Coil Width: 12"
Thickness Range: 0.010" - 0.065"
Max. Coil Weight: 5,000#
Max. Shear: 50,000 PSI
Max. Yield: 50,000 PSI
Coil I.D. (Entry): 15" - 18"
Coil I.D. (Exit): 16" and 20"
Max. Coil O.D.: 60"
Line Direction: Right to Left
Mode of Operation: Pull Thru
Line Speed: 0 - 400 FPM

Consisting of the following:

-Uncoiler:
Single Mandrel Type
4.5" Dia. Main Shaft
18" Face Mandrel
14.5" - 18" Expansion Range
Manual Expansion
Fawick Air Brake
Passline: 40.5" from Floor to center of Mandrel
(Mounted on 12" I-Beam Base)
Overall Size: 70" L x 44" W x 54" High

-Slitter Head:
Entry Passline Rolls
Entry Side Guides, Manual Adjustment
3.5" Dia. x 14" Face Arbors
Manual Outboard Retraction
Manual Parallel Arbor Adjustment
5 HP AC Motor, 1170 RPM, 230/460 V
H&S Right Angle Reducer w/25:1 Ratio
Passline: 50"
Overall Size: 82" L x 48" W x 71" High

-Recoiler:
16" Dia. x 16" Face Drum
20" Dia. x 17" Face Bolt-On Pads
Manual Expansion
4.75" Dia. Main Shaft
Gripper Slot (Gripper Bar Missing)
Hydraulic Pushoff
30 HP Baldor AC Motor, 1160 RPM, 230/460 V
Philadelphia Gear Reducer w/6:1 Ratio
Belt Drive from DC Motor w/3:1 Ratio
Total Reduction: 18:1
Self-Contained Hydraulic Power Unit
3 HP, 460 V
Vickers Pump
Passline: 47" from Floor to center of Drum
(Mounted on 10" I-Beam Base)
Overall Size: 92" L x 89" W x 92" High

-Free Standing Overarm Separator:
2.5" Dia. x 14" Face Tooling Shaft
Air Cylinder Operated
Overall Size: 67" L x 37" W x 80" High

-Scrap Winder:
15" W x 30" Dia. Scrap Ball Capacity
Hydraulic Motor Powered, Eaton/Char-Lynn Motor
Level Wind w/Air Cylinder
Manual Scrap Dump
Overall Size: 65" L x 48" W x 42" High

-Electrical Controls:
Main Operators Control Pedestal
AC Control Cabinet
ABB Variable Speed Recoiler Drive, Model ACS 550-U1

-Slitter Tooling:
Knives, (36) - 7" O.D. x 0.187" Wide, w/3/8" x 5/8" keyway
Steel Spacers
Rubbers
Overarm Separator Tooling

-In Storage: Toledo, OH


Your machine has been added to the Cart.

Click the Checkout button below or continue adding machines to the Cart.

0

Main Office  |  723 Phillips Avenue, Bldg. D2 Toledo, Ohio 43612  |  Phone: (419) 841-3586  |  Fax: (419) 841-2986  |  Email: sales@dnhmachinery.com