Affiliated Companies: Excel Industries, Inc. and H.K. Holdings, Inc.

Roll Feed Line, 36" x 0.080" x 20,000# B&K / Mecon

Ref # 9957-HK

Click on photo to enlarge


36" x 0.080" x 20,000# Roll Feed Line

Consisting of:

-B & K Uncoiler:
20,000# x 36" Wide Capacity
40" Mandrel Face
16" - 20" ID with pads for 24"
Hydraulic Wedge Type Expansion
(4) Segment Mandrel
Hydraulic Sliding Base
24" Fawick Air Brake
Self Contained Hydraulic Power Unit
41" Passline
Overall Size: 123" L x 53" W x 84" High
Approx. Weight: 7,680#

-Mecon Straightener:
Model: 4STR36
Year: 1995
Serial Number: STR134
Capacity: 36" x 0.080"
Attached Holddown Roll
Entry Peeler Table, Hyd. Up/Down, In/Out
Entry Edge Guides, Manual Adjustment
Entry Pinch Rolls: 3.25" Dia. x 35" Face (2 Sets)
7 Work Rolls, 3 over 4
3.25" Dia. x 37.5" Face Rolls
Exit Pinch Rolls: 3.25" Dia. x 38" Face
Loop Control: Sona-Trol
5 HP Baldor Motor, 1750 RPM, 575 Volt, 3 PH, 60 Hz.
Gear Reducer with 20:1 Ratio
Line Direction: Left to Right
Passline: 63"
Operating Manual and Drawings included.
Overall Size: 123" L (with Holddown Roll) x 70" W x 78" High
Approx. Weight: 4,930#

-Mecon Roll Feed:
400F-I Series
Year: 1995
32" Wide Capacity
37" Face x 4" Dia. Rolls
Air Cylinder loaded
Entry Edge Guides, Manual Adjustment
Operators Control Panel with Indramat Pushbutton Keypad
Indramat Servo Drive
40" Passline
Operating Manual and Drawings Included
Overall Size: 59" L x 40" W x 55" High
Approx. Weight: 2,080#
Note: This Feeder is not meant to pull material directly off an
Uncoiler. It is designed to pull material from a free loop.

-B & K Mechanical Cutoff Press:
44" Between Posts (R-L)
16.5" Between Posts (F-B)
Post Diameter: 3.5"
16" Ram to Bed
Stroke: 3" - 3.5" Approx.
40" from Floor to Top of Die Rails
32.5" from Floor To Top of Bed
Wichita Air Clutch and Brake
7.5 HP AC Motor, 1170 RPM, 575 V
Overall Size: 89" L x 53" W x 56" High

-In Storage: Toledo, Ohio

Your machine has been added to the Cart.

Click the Checkout button below or continue adding machines to the Cart.

0

Main Office  |  723 Phillips Avenue, Bldg. D2 Toledo, Ohio 43612  |  Phone: (419) 841-3586  |  Fax: (419) 841-2986  |  Email: sales@dnhmachinery.com