Affiliated Companies: Excel Industries, Inc. and H.K. Holdings, Inc.

48" x 7.00" x 25,000# Lee Wilson Slitting Line

Ref # 9065-HK

Click on photo to enlarge

YEAR: 1965

Materials: HRS, CRS, P & O
Maximum Coil Width: 48" (50" untrimmed)
Thickness Range: 0.040" - 0.187"
Maximum Coil Weight: 25,000#
Maximum Shear: 45,000 Psi
Maximum Yield 45,000 Psi
Coil I.D.: Entry: 16" - 20" & 24"
Exit: 20"
Maximum Coil O.D.: 65"
Line Direction: Right to Left
Mode Of Operation: Pull Thru

Consisting of the following:

-Entry Coil Car: Revolvator
Mast Type
Floor Mounted
Self Contained Hydraulics
Powered Lift and Traverse

Single Mandrel Type
Hydraulic Expansion
16" - 20" with risers for 24" ID
Slide Base
Feedup Drive
Holddown with Powered Snubber Roll
Wichita Air Cooled Brake
Self Contained Hydraulics
72" O.D. Capacity
Passline: Approx. 49" from floor to center of mandrel
72" Coil O.D. Capacity

-Entry Unit:
Extending Blade Type Peeler
Powered Entry Pinch Rolls

-Removable Slitter Head:
7" Dia. Arbors
Powered Entry Pinch Rolls
Manual Side Guides
Manual Top Arbor Adjust
Manual Outboard Retraction
30 HP DC Motor, 1750 RPM, 480 V
HS Gearbox, Rated at 39.8 HP @ 1750 RPM, 39.2:1 ratio

20" Dia. Drum
Powered Expansion and Gripper
Hydraulic Pushoff
Overarm Separator
75 HP DC Motor, 650/2000 RPM, 480 Volt
H & S Reducer 58:1 ratio

-Electrical Controls:
Main Operators Control Console
AC & DC Control Cabinet

-Slitter Tooling:
Separator Tooling

-Hydraulic System


-Less Scrap Winder

-Removed and in storage: Toledo, Ohio

Your machine has been added to the Cart.

Click the Checkout button below or continue adding machines to the Cart.


Main Office  |  723 Phillips Avenue, Bldg. D2 Toledo, Ohio 43612  |  Phone: (419) 841-3586  |  Fax: (419) 841-2986  |  Email: