Affiliated Companies: Excel Industries, Inc. and H.K. Holdings, Inc.

12" x 2.875" x 2,500# RUESCH SLITTING LINE

Ref # 5919-M

Click on photo to enlarge

YEAR: 1962

MATERIAL: ALUMINUM, BRASS, COPPER, STEEL

MAXIMUM THICKNESS: 0.125"
MINIMUM THICKNESS: 0.006"
MAXIMUM UNTRIMMED WIDTH: 13.75"
COIL WEIGHT - MAXIMUM: 2500#
COIL I.D. AT PAYOFF: 14.5" - 20.5"
COIL WEIGHT PER REWIND ARBOR: 1000# MAX.
MAXIMUM REWIND DIAMETER: 36"

CONSISTING OF THE FOLLOWING:

-PAYOFF - AMERICAN STEEL LINE
MODEL 60
S/N: 8654 4/90
CAPACITY: 2,500# x 20" WIDE
EXPANSION RANGE: 14" - 21"
MANUAL EXPANSION
COIL OD: 54" MAX.
3 SEGMENT MANDREL
3 COIL KEEPERS
EATON AIRFLEX BRAKE
NON-MOTORIZED
35" PASSLINE HEIGHT

-SLITTER HEAD: MODEL 149-83A
N1989 3X
S/N - 5322
NO. CUTS: 6 TO 8 IN 0.062" BRASS
4 IN 0.093" BRASS
2 IN 0.125" SOFT BRASS.
CUTTER DIAMETER: 6"
SPACER DIAMETER: 4"
SLITTING ARBOR: 2.875" DIA. x 13.5" FACE WIDTH
MAX. ENTERING STOCK: 13.75" WIDE
OPERATING SPEED: 0 - 300 FPM
MOTOR: 15 HP AJUSTO WITH DYNATORQ BRAKE
JOG ACCELERATIONS STARTER AND PUSH
BUTTON CONTROLS. (COMMON DRIVE FOR
SLITTER HEAD AND TAKEUPS)
ELECTRICS: 208 v/3 ph/60 hz

-SLITTER WITH LINK GEARS AND ANTI-FRICTION BEARINGS
(SAME AS N1780)
-ENTRY TABLE WITH ROLLER SIDE GUIDES
MANUALLY ADJUSTABLE
(N1967 TABLE WITH SHOP MODIFICATIONS)
-SINGLE TOP AND DOUBLE BOTTOM PRESSURE BARS
FINGER SUPPORTS
-ENTRY PASSLINE ROLL
-STEEL STRIPPER RING ASSEMBLY. TOP AND BOTTOM
6.5" DIA. STEEL RINGS
-IDLE EXIT PINCH ROLLS
2" DIA. x 14.5" FACE WIDTH
(SHAFT EXTENDED FOR FUTURE DRIVE TO BOTTOM ROLL ONLY)

-DOUBLE ARBOR ELECTRIC CLUTCH TAKEUP (LIKE N1804)
DYNAMATIC CLUTCH ON EACH TAKEUP ARBOR WITH TOOTH TYPE
DRIVE BELTS.

-TAKEUP (RECOIL) ARBORS: (2) - 2.5" DIA. ARBORS (SIMILAR TO N1804)

-TAKEUP (RECOIL) DRUMS:

ONE (1) - 6" DIA. x 20" FACE, SOLID DRUM W/MATERIAL SLOT
AND 14" DIA. BACKPLATE. 3" BORE

ONE (1) - 6" DIA. x 22.5" FACE, SOLID DRUM
WITH 14" DIA. BACKPLATE. 2.5" BORE

ONE (1) - 8" DIA. x 15" FACE, MANUAL EXPANSION W/MATERIAL SLOT
AND 16" DIA. BACKPLATE. 2.5" BORE

-SCRAP WINDER
NON-DRIVEN (CAN BE DRIVEN)

-SLITTER TOOLING (KNIVES ONLY): 19 KNIVES - 0.187" WIDE
32 KNIVES - 0.125" WIDE

-APPROX. SIZE OF SLITTER ONLY: 131" L x 65" W x 58" HIGH

-IN STORAGE; ROCKFORD, IL.




Your machine has been added to the Cart.

Click the Checkout button below or continue adding machines to the Cart.

0

Main Office  |  723 Phillips Avenue, Bldg. D2 Toledo, Ohio 43612  |  Phone: (419) 841-3586  |  Fax: (419) 841-2986  |  Email: sales@dnhmachinery.com