Affiliated Companies: Excel Industries, Inc. and H.K. Holdings, Inc.

60" x 7.50" x 50,000# Pro Eco Slitting Line

Ref # 10289-C

Click on photo to enlarge


Used 60" (1524 mm) x 7.50" (190 mm) x 50,000# (25 Short Ton) Pro Eco
Slitting Line

Material: Cold Rolled Steel, Galvanized or Equivalent
Shear Stress: 50,000 PSI
Coil Weight: 50,000 lbs.
Coil Width: 60" (1524 mm)
Coil O.D.: 72" (1830 mm)
Coil I.D.: In: 20" - 24" (50 mm - 610 mm)
Out: 20" (508 mm)
Gauge Range: 0.010" - 0.200" (0.25 mm - 5 mm)
Line Speed: Constant - 200/650 FPM (61 MPM - 200 MPM)
Buildup to 1000 FPM
Line Direction: Left to Right

Consisting of the following:

-Entry Coil Storage Stand:

-Entry Coil Car:
Low Profile Scissors Lift Type
Self Contained Hydraulics

-Uncoiler:
Hydraulic Expansion
20" - 24" Coil I.D. Range (508 mm - 610 mm)
4 Leaf Pumpkin Tooth Mandrel
Sliding Base
Attached Powered Holddown Roll
3 HP AC Feedup Motor w/Air Clutch
Water Cooled Brake
Outboard Support Arm

-Automatic Edge Control:

-Entry Unit:
Hydraulic Actuated Peeler Table
Hydraulic Coil Breaker Roll
Passline Roll & Carry Table
Driven Pinch Rolls
Entry Edge Guide Unit, Hydraulic Motor Adjustment

-Slitter Heads:
(2) Crane Removable Heads
7.50" Dia. Arbors (190 mm)
Single Eccentric Adjustment
Parallel Top Arbor Adjustment
Manual Outboard Housing
Exit Scrap Guides
200 HP DC Motor & Drive (New 2000)
Tooling: 0.250" & 0.500" Knives (6.3 mm - 12.7 mm)

-(2) Scrap Winders:
Auto Dump
Hydraulic Oscillation

-Looping Pit:

-Tension Stand:
Entry Cascade Rolls
Hydraulic Pit Carry-Over Table attached to Tension Stand
Drag Wipe Tension Stand
Entry Separator Tooling Bar
Idler Passline Roll

-Exit Crop Shear:
Hydraulic Down Cut Design
Straight Blade Type
Exit Passline Roll, Neoprene Covered
Carry-Over Table to Recoiler

-Recoiler:
20" Dia. Drum, Plates for 24" (508 mm & 610 mm)
Hydraulic Gripper & Expansion
Attached Overarm Separator
Hydraulic Pushoff
150 HP DC Motor, 1750/2100 RPM, 500 V

-Exit Turnstile:
(2) Arms
C-Hook Type Arms
Hydraulic Rotation
Hydraulic Pull-Off Device

-Line is Removed and in Storage:

Your machine has been added to the Cart.

Click the Checkout button below or continue adding machines to the Cart.

0

Main Office  |  723 Phillips Avenue, Bldg. D2 Toledo, Ohio 43612  |  Phone: (419) 841-3586  |  Fax: (419) 841-2986  |  Email: sales@dnhmachinery.com